Shell Clavus® Oils
Product Code:67028

ISO Grades 32 and 68
Shell Clavus® Oils are highly refined naphthenic base petroleum oils intended for use

in compression refrigeration systems containing non-hydroflurocarbon refrigerants such

as R-12, R-22, R-502 and ammonia.

AeroShell® Fluid 41 is mineral oil based aircraft hydraulic oil with

excellent low temperature characteristics that is capable of

operating over a wide range of temperatures. This fluid is

oxidation inhibited, and contains a special anti-wear additive.

AeroShell Fluid 41 is dyed red for identification and leak

detection purposes.

Shell Torcula® Oils
Product Code:66545Shell Torcula® Oils are specially developed lubricants of high film

strength that provide improved lubrication of rock drills, jackhammers, sinkers and

other air operated percussion tools. Torcula Oils are blended with an unusual com-

bination of high film-strength, oiliness and anti-wear additives into high quality

mineral oils. These products have consistently provided outstanding field perfor-

mance. Torcula Oils atomize readily in air line lubricators to make an oil mist. This

mist passes through the drill, lubricates the closely-fitted working parts and restricts 

the build-up of frictional heat. A protective oil film helps prevent metal parts 

from rust caused by moisture-laden air.

Shell IRUS™ Fluid D 46
Irus® Fluids D 46 and 68 are fully synthetic ester type hydraulic fluids. They do not

contain mineral oil, phosphate esters, chlorinated hydrocarbons or water. They are

designed to be chemically stable when operating conditions are such that severe

physical demands are placed on the fluid.

AeroShell® Grease 33
AeroShell® Grease 33 is a multipurpose airframe grease specifically developed  for

Boeing to be used in roller bearings, actuator screws and other airframe equipment.

It is made with synthetic base oil and a Lithium Complex thickener, which provides

enhanced corrosion resistance and load-carrying capacity. It has a useful temperature

range of -100° F ( 73° C) to +250° F (+121° C). AeroShell Grease 33 is qualified under

MIL-PRF-23827C and Boeing Specification BMS 3-33A.

Shell Corena® Fluids PAO
Product Code:67225

Shell Corena® Fluids PAO are synthetic lubricants designed for the lubrication of

compressors. They are formulated utilizing the highest quality base fluids that are

available in combination with the most technologically advanced additive systems

that modern research has been able to develop.