|
Shell
Hydraulic Oils FM
Product Code:65547
The Shell Hydraulic Oil FM series is
specially formulated to meet the lubrication requirements of hydraulic
systems operated in food processing plants. Shell Hydraulic Oils FM are
manufactured in accordance with FDA 21 CFR 178.3570 and meets 1998 USDA
guidelines as H-1 lubricant with incidental food contact for use in
plants operating under the Federal Meat and Poultry Products Inspection
Program. Shell Hydraulic Oils FM are registered with NSF International
and are certified Kosher-Parve by the Kosher Overseas Association of
America. |
|
Shell
Tellus® Fluids HD
Product Code:65477
Shell Tellus® Fluids HD are anti-wear,
hydraulic fluids based on advanced synthetic hydrocarbon technology.
Tellus Fluids HD are available in ISO viscosity grades 32, 46, and 68. |
|
Shell
TELLUS® Oils T
Product Code:65407
Shell Tellus® T Oils are available in
six ISO viscosity grades 15 through 100. These oils are blended with a
carefully selected viscosity index (VI) improver in severely
hydroprocessed Group II base oils to give a high VI without excessive
loss of viscosity from mechanical shearing. Shell Tellus Oils T,
therefore exhibit less change in viscosity with temperature than
conventional hydraulic oils. In addition, Shell Tellus Oils T are
compounded to give anti-wear performance, oxidation resistance and
protect against rust and corrosion.
top
|
|
 |
Shell
Donax® TD
Shell Donax® TD oils are premium quality
fluids for use in transmissions, hydraulic systems, oil immersed brakes
and other ancillary systems fitted to agricultural tractors and off-
road equipment. They are exceptional universal tractor fluids specially
formulated for use where a common fluid reservoir serves transmissions,
final drives, and hydraulic systems.
|
 |
Shell
Tellus® PLUS Oils
Product Code:65206
Shell Tellus®Plus Oils
are available in seven ISO viscosity grades for use in virtually all
machine lubrication and hydraulic fluid applications. The grades range
from ISO VG 22 to 220. Tellus Plus Oils are premium products
formulated with an effective anti-wear compound compatible with copper
bearing components for hydraulic or circulating systems requiring high
quality anti-wear oils, such as those recommended by hydraulic pump
and machine tool manufacturers. They are formulated with severely
hydroprocessed Group II base oils with superior thermal and oxidative
stability.
top
|
Shell
Turbo® DR 46
Product Code:65612
TURBO® DR 46 is a high
performance, fire-resistant hydraulic fluid based on tri-aryl
phosphate manufactured from carefully
selected raw materials. This product is designed
for use in electro hydraulic governor
control systems of steam turbines, including
systems using fine tolerance servo
valves. It does not contain mineral oil, polyolesters,
chlorinated
hydrocarbons or water.
top
top |
|
|
Anti-freeze/Coolants
Transmission Fluids
Engine Oils
Greases
Gear Oils
Special Application Fluids
|
